What is your thought about it?

Второй форум - можете его удалить или переименовать.
Это ваш сайт - поэтому делайте все, что пожелаете!
Сообщения: 8
Зарегистрирован: 20 июн 2018, 17:19

What is your thought about it?

Сообщение spadekevin » 21 июл 2018, 12:59


I've been scratching my head over this issue since I got the printer couple of weeks ago. Terrible support from them and my feeling is they are not even aware of all the issues that their printer have . Anyway I am posting some pics to better illustrate the issue. These 2 cylinders are printer at 0.3 mm , once sliced with CURA and the other with Simplify3d . Not even bothering here about the blobs for now but I am just trying to understand what is causing those repetitive XY shift on Z. Excluding the slicer software since the problems is there regardless, and after reading and searching the internet for the problem I though that the cause of the problem might be the Z screw. I then attached 2 markers to the platform and I lifted the platform for about 10-15 cm and I cannot really relate the print issue with those marks.
What is your thought about it? I just know dont know what else to tweak. The print speed was I think 35-40 mm/s so not that high. Material is HIPS...but ABS showed the same print temp between 230-240.

Please help.

I didn't find the right solution from the internet.

Recycle Management Solution Video

Thank you.
Сообщения: 6
Зарегистрирован: 29 янв 2019, 07:24

Re: What is your thought about it?

Сообщение funnyjokes » 29 янв 2019, 07:32

Your site has a lot of useful information for myself. I visit regularly. Hope to have more quality items.

Вернуться в «Второй форум»

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 1 гость